Connection Type: HDMI A to C Type cable – Mini HDMI to HDMI

Connect your Digital Camcorders, Digital Cameras or Game Consoles to your HDTV

Fully Shielded, durable 30 Gauge Premium ...

Product Overview

• CAT5E CAT5 RJ45 Ethernet Internet Network Patch Lan Cable Cord M/M for Networks Devices

Voltage : R: 1.8V – 2.2V, G: 3V – 3.4V, B: 3V – 3.4V

Max Forward Voltage: 3.6V

Max Forward Current: 20 mA

Emitted Color: Red/Green/Blue

Type: Choose

Lens ...

Max. Forward Current: 20Ma

Emitted Colour : Green

Life Rating : 100,000 Hours

• BT Version: Bluetooth Specification V4.0 BLE
• Working frequency: 2.4GHz ISM band
• Power: +3.3VDC 50mA

Operating Voltage: 3.3V to 5V DC

Operating Current: 15mA

Output Digital - 0V to 5V, Adjustable trigger level from preset

Output Analog - 0V to 5V ...

High transparency brings good look on the join position.

Being colorless and odorless makes comfortable working environment.

Long open time improves application flexibility.

Model : Gluematic 3002

Glue Stick Diameter (mm) : 11 mm

Power Consumption (Watt) : 16 W

Item Weight (Kgs) : 0.320 kg

This is a protective case specifically designed for the Raspberry Pi 4.

The case is a two-piece injection-molded ABS enclosure that snaps together around the Raspberry Pi. Holds the ...

The HDMI-VGA adapter is compatible with computer, PC, desktop, laptop, ultrabook, notebook, Chromebook, Raspberry Pi, Intel Nuc, Roku, PS3, Xbox One, Xbox 360, U, Set Top Box, TV BOX, or other ...

• Input voltage : 110-240V AC, 50/60 Hz
• Output voltage : 5V DC
• Output current : 2 Amp (Max.)
• Output wattage : 10 Watt (Max.)

Working voltage: dc5v

operating current: 30ma (max)

Response time: <500ms

The output way: analog output 4.5V

Detection Range: 10 - 300 ppm NH3, 10 - 1000 ppm Benzene, 10 - 300 Alcohol. Heater Voltage: 5.0V. Dimensions: 18mm Diameter, 17mm High excluding pins, Pins - 6mm High. Long life and low cost.

• Interface: I2C
• Power supply voltage: 3V3~5V DC
• SCL Clock Frequency: 400kHz max
• Small measurement variation (+/- 20%)
...

Light dependent resistor specifications

Example Photoresistor Specifications

Parameter Example Figures

Max voltage @ 0 lux

• Quick view
• Add to cart
• Add to wishlist

Low cost, compact and powerful Wi-Fi Module

Power Supply: +3.3V only

Current Consumption: 100mA

I/O Voltage:  3.6V (max)

I/O source current: 12mA (max)

Transmission Frequency: 2.4GHz to 2.5GHz

Number of Channels: 16 Direct Sequence Channels

Featured with UART (250 Kb/s maximum) and SPI (5 Mb/s maximum) interface

Featured ...

Length: 2.2″

Life Cycle: >1 million

Height: 0.43mm (0.017″)

Flat Resistance: 10K Ohms ±30%

Bend Resistance: minimum 20K Ohms ±30% (@ 180° pinch bend)

Power ...

The BMP180 from Bosch Sensortec is the latest in the line of barometric pressure sensors and this breakout board makes it easy to interface with an Arduino. This device can measure pressure in ...

Working frequency: 2.4GHz ISM band

Modulation method: GFSK(Gaussian Frequency Shift Keying)

RF Power: 0.01mw-5mw, can modify through AT Command AT+POWER

Power: +3.3VDC ...

• Operating Range: Voltage: 3-3.6V, 
• 2.4GHz global open ISM band, with license-free
• SPI interface facilitates the communication with MCU I/O ...

Product Overview

Scandisk 16GB SD Card

Product Overview

• Full Compatible with Arduino
• OLED Driver IC: SSD1306
• Resolution: 128 x 64
• Visual Angle: >160°
• Display Color: Area Color ...

• Pre-assembled, Ready to run robot with pre-loaded Arduino code
• ...

• Brand: Electrobot
• Motor Driver Shield Expansion Board ...

Wire strippers are used to remove the insulation from electric wires in order to make contact. ... A manual wire stripper has opposing blades like a pair of scissors, but has a notch in the ...

Wire cutters are commonly used to cut copper, brass, iron, aluminum, and steel wire. Some wire cutters have insulated handles which ensure that you will not get shocked from the wires you're ...

EC20 series is a new generation of Quectel LTE module.

• Full Copper Transformer built-in (No Aluminum)
• ...

ESP32 Starter Kit is great for IoT Learning, this kit includes everything you need to get started with esp32 kit and a lot of things that will take you from a beginner to an enthusiast. This ...

Arduino Uno Starter Kit 101 is great for beginners, this kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take ...

Ultra-low power operation (26μA Standby-I mode, 900nA power down mode)

SPI Interface with Microcontroller

Integrated RF Transmitter, Receiver and Synthesizer

Operating ...