In this type the common pin on the 7-segment display is connected to all the eight Cathode pins of the LEDs. 

Voltage : R: 1.8V – 2.2V, G: 3V – 3.4V, B: 3V – 3.4V

Max Forward Voltage: 3.6V

Max Forward Current: 20 mA

Emitted Color: Red/Green/Blue

Type: Choose

Lens ...

High transparency brings good look on the join position.

Being colorless and odorless makes comfortable working environment.

Long open time improves application flexibility.

• Type: Rotary POT
• Available in different resistance values like 500Ω, 1K, 2K, 5K, 10K, 100K, 1M. 
• Power Rating: 0.3W
• Maximum Input ...

This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diameter of 2.1mm.

• Through-hole design.
• Shaft Shape: Round

• Detection distance: 2 ~ 30cm
• Detection angle: 35 °
• Comparator chip: LM393
• 3mm screw holes for easy mounting

Operating temperature : 10 to +40 ℃

Storage temperature : -15 to +85 ℃

Output power :  5 mW.

Normal and maximum operating voltage is 2.2 and 2.7 respectively.

Max. Forward Current: 20Ma

Emitted Colour : Green

Life Rating : 100,000 Hours

Pin Out – 4 Digit 7 Segment Display

A 4-digit 7-segment LED display has 12 pins. 8 of the pins are for the 8 LEDs on each of the 7 segment displays, which includes A-G and DP (decimal ...

Product Overview

• CAT5E CAT5 RJ45 Ethernet Internet Network Patch Lan Cable Cord M/M for Networks Devices

• Input voltage: 3-40V
• Output voltage: 1.5-35V(Adjustable)
• Output current: Rated current is 2A, maximum 3A
• Switching Frequency: 150KHz
• Operating ...

Resistor BoX

Operating Voltage: 3.3V to 5V DC

Operating Current: 15mA

Output Digital - 0V to 5V, Adjustable trigger level from preset

Output Analog - 0V to 5V ...

Product Overview:

• One normally closed contact and one normally open contact
• Channel: 1 channel
• Relay ...

1. Current : 1.0 A (without heat sink)

2. Current : 2.0 A (with heat sink)

3. Supply voltage : 8-35 VDC

4. Logic input : 3-5.5V 

The spring on the stand holds the hot soldering iron. The damp sponge is used to clean the tip of the iron. Solder braid is used to remove solder; solder is "soaked up" into the braid when it ...

General purpose for all electronic applications

Attains full operating temperature within seconds

Durable elements designed for long life

Premium quality

The tilt sensor is ball rolling type, NOT Mercury type. The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted ...

Product specifications

• Product type: 4 X 4 keypad module
• Keypad Dimensions: 6.9 cm X 7.9 cm
• Cable dimensions: 2.0 ...

• Voltage supply: 3.5V-5V
• Typical voltage supply: 5V
• Output type: analog output voltage (AO) and digital switching voltage(DO)
...

Operating Voltage : 5V DC

Digital Output 0V or 5V direct interface to a microcontroller with LED indication

PCB size : 32x12mm

Detector type : Magnetic sensing hall ...

Wire cutters are commonly used to cut copper, brass, iron, aluminum, and steel wire. Some wire cutters have insulated handles which ensure that you will not get shocked from the wires you're ...

Max. Operating Voltage : 35V.

Min. Operating Voltage : 8V.

Max. Current Per Phase : 2A.

Microstep resolution : Full step, ½ step, ¼ step, 1/8 and 1/16 step.

Reverse ...

Wire strippers are used to remove the insulation from electric wires in order to make contact. ... A manual wire stripper has opposing blades like a pair of scissors, but has a notch in the ...

• Voltage: DC 3.3V (Do not use 5V supply), Operating Current :13-26mA
• Operating Frequency: 13.56MHz
• Supported card types: mifare1 S50, mifare1 S70, Mifare Ultralight, ...

The power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board

Communication interface is a standard SPI interface

Power supply voltage(VCC): 2.0, 3, 5.5 V.

Output high VOH: 0.8VCC V

Output low VOL: 0.3VCC V

Response time (touch mode) : 60 mS

Output Pin Sink Current (@ VCC = 3V, ...