Reference: 51000265
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Hardware or X-On/X-Off handshaking supported.
USB suspend states supported via SUSPEND pins.
CP2102 chip is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB.
Pinouts:-
TX = Connect to Transmit Pin(TXD) of Micro controller. This pin is RX pin of CP2102 on board.
RX = Connect to Receive Pin(RXD) of Micro controller. This pin is TX pin of CP2102 on board.
RST = Normally Unconnected. Reset Pin for CP2102. Initiate a system reset by driving this pin low for atleast 15 µs.
GND = Should be common to microcontroller ground.
3V3 = Optional output to power external circuit upto 50mA.
5V = Optional output to power external circuit upto 100mA
Warranty Information:
All the products supplied by Makerkart are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page
No customer reviews for the moment.
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Hardware or X-On/X-Off handshaking supported.
USB suspend states supported via SUSPEND pins.
2.54mm pin interface leads
Operating Voltage: 5V.
Long service life and stable ...
Onboard TTP224 capacitive touch sensor IC
4 board-level status indicator
...
The BMP180 from Bosch Sensortec is the latest in the line of barometric pressure sensors and ...
Incremental Encoder
Supply Voltage: 3-5V
Left/Right rotary output pulse, each ...
