• Type: Rotary POT
• Available in different resistance values like 500Ω, 1K, 2K, 5K, 10K, 100K, 1M. 
• Power Rating: 0.3W
• Maximum Input ...

Arduino Uno Starter Kit 101 is great for beginners, this kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take ...

Light dependent resistor specifications

Example Photoresistor Specifications

Parameter Example Figures

Max voltage @ 0 lux

• Quick view
• Add to cart
• Add to wishlist

High transparency brings good look on the join position.

Being colorless and odorless makes comfortable working environment.

Long open time improves application flexibility.

ESP32 Starter Kit is great for IoT Learning, this kit includes everything you need to get started with esp32 kit and a lot of things that will take you from a beginner to an enthusiast. This ...

NodeMCU Development Kit/Board consist of ESP8266 wifi chip. ESP8266 chip has GPIO pins, serial communication protocol, etc. features on it. ESP8266 is a low-cost Wi-Fi chip developed by ...

Product Overview

• Voltage – Supply: 2.2 V ~ 3.6 V.
• Current – Transmitting: 80 mA.
• Operating Temperature: -40°C ~ 85°C.
• Power – Output: 16.5dBm.
...

Power Supply： 3.3~5.5V DC

Output： 4 pin single row

Measurement Range： Humidity 20-90%RH， Temperature 0~50℃

Accuracy： Humidity +-5%RH， Temperature +-2℃

Resolution： ...

The BMP180 from Bosch Sensortec is the latest in the line of barometric pressure sensors and this breakout board makes it easy to interface with an Arduino. This device can measure pressure in ...

Max. Operating Voltage : 35V.

Min. Operating Voltage : 8V.

Max. Current Per Phase : 2A.

Microstep resolution : Full step, ½ step, ¼ step, 1/8 and 1/16 step.

Reverse ...

This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diameter of 2.1mm.

In this type the common pin on the 7-segment display is connected to all the eight Cathode pins of the LEDs. 

• Quad Core 1.2GHz Broadcom BCM2837 64bit CPU
• 1GB RAM
• BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board
• 100 Base ...

General purpose for all electronic applications

Attains full operating temperature within seconds

Durable elements designed for long life

Premium quality

Product Overview:

• I2C interface : Fast (400kHz) I2C Interface.
• EEPROM: AT24C32 32Kbit Serial I2C.
...

The power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board

Communication interface is a standard SPI interface

Operating temperature : 10 to +40 ℃

Storage temperature : -15 to +85 ℃

Output power :  5 mW.

Normal and maximum operating voltage is 2.2 and 2.7 respectively.

• Support CAN 2.0B protocol
• Use High-speed CAN transceiver TJA1050
• Dimension: 40×28mm
• SPI control for expand Multi CAN bus interface
• 8MHZ crystal ...

Product Overview

• Full Compatible with Arduino
• OLED Driver IC: SSD1306
• Resolution: 128 x 64
• Visual Angle: >160°
• Display Color: Area Color ...

Wire strippers are used to remove the insulation from electric wires in order to make contact. ... A manual wire stripper has opposing blades like a pair of scissors, but has a notch in the ...

• Microcontroller ATmega328P
• Operating Voltage 5V
• Input Voltage (recommended)  7-12V
• Input Voltage (limit)  6-20V
• Digital ...

Single-Supply Operation (2.7V to 5.5V)

High-Resolution Conversion of Light Intensity to Frequency

Programmable Color and Full-Scale Output Frequency

Communicates Directly ...

• Voltage: DC 3.3V (Do not use 5V supply), Operating Current :13-26mA
• Operating Frequency: 13.56MHz
• Supported card types: mifare1 S50, mifare1 S70, Mifare Ultralight, ...

Heating voltage: 5V ± 0.2V

Working current: 140mA

Loop voltage: 10V (maximum DC 15V)

Load resistance: 10K (adjustable)

Detection concentration range: 10-1000ppm

Operating voltage 3.3V-5V

Outputs digital switching output (high and low level 0 and 1

Operating current (Vcc=5V): 4-8mA

Microphone sensitivity (1Khz): 52-48dB

Power supply voltage(VCC): 2.0, 3, 5.5 V.

Output high VOH: 0.8VCC V

Output low VOL: 0.3VCC V

Response time (touch mode) : 60 mS

Output Pin Sink Current (@ VCC = 3V, ...

The HMC5883L is a triple-axis magnetometer compass, which uses I2C for communication. This Module consists of an on-board voltage regulator allowing you to power the module with voltages ...

The tilt sensor is ball rolling type, NOT Mercury type. The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted ...

Detection Range: 10 - 300 ppm NH3, 10 - 1000 ppm Benzene, 10 - 300 Alcohol. Heater Voltage: 5.0V. Dimensions: 18mm Diameter, 17mm High excluding pins, Pins - 6mm High. Long life and low cost.

Operating Voltage : 5V DC

Digital Output 0V or 5V direct interface to a microcontroller with LED indication

PCB size : 32x12mm

Detector type : Magnetic sensing hall ...

The HDMI-VGA adapter is compatible with computer, PC, desktop, laptop, ultrabook, notebook, Chromebook, Raspberry Pi, Intel Nuc, Roku, PS3, Xbox One, Xbox 360, U, Set Top Box, TV BOX, or other ...

This is a protective case specifically designed for the Raspberry Pi 4.

The case is a two-piece injection-molded ABS enclosure that snaps together around the Raspberry Pi. Holds the ...

Wattage : 25W

Input : 230Vac

Temperature : 380ºC Max.

Wire : 3 Core, 1.4mtrs length

The spring on the stand holds the hot soldering iron. The damp sponge is used to clean the tip of the iron. Solder braid is used to remove solder; solder is "soaked up" into the braid when it ...